Following its launch at FESPA this year, Nottingham-based distributor ArtSystems will introduce the Summa F-Series F2630 flatbed cutter to the UK at the end of September.
The F2630 enables sign-makers and print providers to process even larger media and also creates the possibility to process two media rolls at once on the roll support system.
With a working area of 2650 mm x 3050 mm it also has a wide set of tools and modules, plus those already featured on the smaller F1612 model. This means high details in thin films can be cut with the kiss cutting tools; cut-out tools are suitable for all kinds of plastics and thin cardboards, whereas oscillating tools (in combination with creasing wheels and v-cut knifes) will handle cardboard and foam boards perfectly. On top of that a 1kW router is available for hard board material up to 25 mm thickness, such PVC, acrylic, wood or aluminium boards.
‘The original F1612 has been very successful in moving many traditional sign makers into new markets and helping to boost their print finishing workflow enabling them to grow this side of their business. We’re confident that the new F2630 will do the same but also give us the opportunity to move into the packaging, textile and leather markets in a more direct way. We’re very confident that it will make a big impact in these markets,’ said Andrew Edwards, sign & display divisional manager.
The working surface of more than 8 sqm is split up into 12 vacuum zones, each of which can be automatically switched on or off individually. This way small as well as big boards, sheets or rolls can be processed. Moreover, by using the front and rear zones alternating, tandem mode leads to significant increases in productivity. With the tandem mode the active working area on the flatbed can be divided into front and back processing areas, which enables the user to load and unload material on one end of the table whilst cutting material on the other end of the table. This will avoid idle periods during the processing of material, adding significant value to the overall workflow.
